Fine Adjustment of Zilla Bracelet on my Citizen 1000m Autozilla...SuppaAutozilla...Year 2016

I've had my Zilla Bracelet last adjusted about 6 days ago. It was a bit on the loose side. The watch could slide along my wrist about an inch and a half in the early morning and tighten up a bit more by midday. Still a touch too loose, IMO.

I have had the last link in the bracelet that ends in the clasp end with three fine adjustment holes shifted to the inner most hole. Watch felt fine after that but I noticed that the second last link being shifted halfway into the clasp cover got a little scratched from friction. Knowing that titanium tends to grab at other metals, this being a stainless steel clasp, I thought it makes sense to remove an extra link and shift the adjustment back out to the outermost hole. This would eliminate the scrubbing contact between the 2nd last link and the clasp cover end.

Out came my trusty modified(thinned down to fit) 1.8mm screw driver (two of them) and out came the link. Weight of my SuppaAutoZilla had dropped from the last bracelet adjustment of 222g to a current 218g.